As an professional Lithopone factory, Jinan Hongquan Titanium Industry Co., Ltd is located in Jinan, a beautiful spring city. The company’s scientific research personnel sincerely cooperate with well-known domestic universities and various titanium dioxide production enterprises to study and produce active Lithopone with great concentration. Some of its products have been widely used in chemical, textile, paper, plastic, paint and other production fields.
Titanium dioxide is an insoluble mineral, meaning it cannot dissolve in water. Known for its bright, white pigment, manufacturers use titanium dioxide in many different capacities, including in cosmetics, foods, and drugs.
Although barium sulfate is almost completely inert, zinc sulfide degrades upon exposure to UV light, leading to darkening of the pigment. The severity of this UV reaction is dependent on a combination of two factors; how much zinc sulfide makes up the pigments formulation, and its total accumulated UV exposure. Depending on these factors the pigment itself can vary in shade over time, ranging from pure white all the way to grey or even black. To suppress this effect, a dopant may be used, such as a small amount of cobalt salts, which would be added to the formulation. This process creates cobalt-doped zinc sulfide. The cobalt salts help to stabilize zinc sulfide so it will not have as severe a reaction to UV exposure.
1. 296 to 1.357 g/cm3 is obtained. The reaction solution is subjected to pressure filtration through a plate frame to obtain a cake-like lithopone powder having a water content of not more than 45%. The mixture is calcined in a dry roaster to change the crystal form of the lithopone, and then acid-washed with sulfuric acid at a temperature of 80 °C. Finally, it is washed with water, reinforced with coloring agent, pressure filtration, drying and milling.
Titanium dioxide, or TiO2, sometimes referred to as E171, is an inorganic, solid substance used in a wide range of consumer goods including cosmetics, paint, plastic and food, according to the American Chemistry Council.
The trend in the production of NPs is likely to lead to increasing amounts of nano-powders in the air, water and soil, which will consequently affect living organisms. Labielle et al. demonstrated that 25 % of Al(OH)3-coated TiO2 particles from sunscreens are dispersed as a stable colloid and become available to microorganisms and filter-feeders, while the remaining 75 % are probably incorporated into geogenic sediments, where they could become available to benthic fauna. Solar UV iradiation may penetrate as far as 20 m in the water column and therefore photo-activate the dispersed particles, which may have an adverse effect on various aquatic organisms.
Overall, the precipitation of titanium dioxide is a complex process that requires careful control of various factors to achieve the desired product properties. By optimizing the precipitation percentage and carefully monitoring the precipitation process, manufacturers can produce high-quality titanium dioxide that meets the stringent requirements of their customers in the paints, coatings, plastics, and cosmetics industries.
The major applications studied in the report include paints & coatings, plastics, printing inks, paper & pulps, rubber, leather, linoleum, and others. Region-wise, the market is studied across North America, Europe, Asia-Pacific, and LAMEA. Presently, Asia-Pacific accounts for the largest share of the market, followed by North America and Europe.