When considering auto parts spark plugs, it is essential to prioritize quality, compatibility, and performance. Iridium spark plugs are known for their longevity and consistent performance, making them a preferred choice for discerning vehicle owners and automotive enthusiasts. The selection of high-quality iridium spark plugs for motor vehicles can contribute to optimized engine operation, improved fuel economy, and reduced maintenance requirements, ensuring reliable performance over an extended service life.
Oil seal for higher pressures
Oil seal manufacturing involves the production of precision-engineered seals designed to prevent the leakage of lubricants and the ingress of contaminants in various industrial and automotive applications. The manufacturing process typically includes the selection of high-quality materials, precision molding or machining, and rigorous quality control measures to ensure the reliability and performance of the oil seals. Advanced manufacturing technologies and expertise are essential for producing oil seals that meet the demanding requirements of diverse industries.
If you have prepared the assembly properly, then you are already largely on your way to a successful installation. The assembly of the oil seal itself is not complex. It is, of course, important that it is done properly in view of the longevity and reliability of the seal.
ERIKS type M (type B according to the DIN standard) has a single metal casing and rubber sealing lip. Since the casing is made of metal, it must be fitted in a well-finished, undamaged groove. Large volumes of oil seals with metal casings are often cheaper, which is why they are often used as original equipment in machines. However, if an oil seal has to be replaced, types with a rubber exterior (type R or RST) are easier to fit. Type MST is similar to M and commonly used. The difference is the dust lip in the MST oil seal that prevents dust and dirt reaching the sealing lip, and extends its service life in dusty environments.
All are fitted with a spring to preload the sealing lip. All these types are for non-pressurised or low-pressure applications up to 0.5 bar for diameters of a limited size. For diameter of 500 mm or more, the maximum pressure is 0.1 bar. For higher pressures, special types or PTFE lip seals can be used.