The composition of lithopone underscores its superiority in specific applications. Ideally, prepared lithopone consists of 30 to 32 percent sulfide of zinc, and a negligible percentage of zinc oxide (1.5%), with the remaining majority being barium sulfate. These attributes render lithopone nearly comparable to the best grades of French process zinc oxide in terms of whiteness. Furthermore, its oil absorption, which sits between lead carbonate and zinc oxide, solidifies its position as a functional and efficient white pigment.
The basic scenario of resistive switching in TiO2 (Jameson et al., 2007) assumes the formation and electromigration of oxygen vacancies between the electrodes (Baiatu et al., 1990), so that the distribution of concomitant n-type conductivity (Janotti et al., 2010) across the volume can eventually be controlled by an external electric bias, as schematically shown in Figure 1B. Direct observations with transmission electron microscopy (TEM) revealed more complex electroforming processes in TiO2 thin films. In one of the studies, a continuous Pt filament between the electrodes was observed in a planar Pt/TiO2/Pt memristor (Jang et al., 2016). As illustrated in Figure 1C, the corresponding switching mechanism was suggested as the formation of a conductive nanofilament with a high concentration of ionized oxygen vacancies and correspondingly reduced Ti3+ ions. These ions induce detachment and migration of Pt atoms from the electrode via strong metal–support interactions (Tauster, 1987). Another TEM investigation of a conductive TiO2 nanofilament revealed it to be a Magnéli phase TinO2n−1 (Kwon et al., 2010). Supposedly, its formation results from an increase in the concentrations of oxygen vacancies within a local nanoregion above their thermodynamically stable limit. This scenario is schematically shown in Figure 1D. Other hypothesized point defect mechanisms involve a contribution of cation and anion interstitials, although their behavior has been studied more in tantalum oxide (Wedig et al., 2015; Kumar et al., 2016). The plausible origins and mechanisms of memristive switching have been comprehensively reviewed in topical publications devoted to metal oxide memristors (Yang et al., 2008; Waser et al., 2009; Ielmini, 2016) as well as TiO2 (Jeong et al., 2011; Szot et al., 2011; Acharyya et al., 2014). The resistive switching mechanisms in memristive materials are regularly revisited and updated in the themed review publications (Sun et al., 2019; Wang et al., 2020).
Below are selected applications of photocatalytic pollutant decomposition processes on titanium oxide:
1. Self-cleaning surfaces: for the production of glass for spotlights, traffic lights, car mirrors, window panes, for road paints, for covering sound-absorbing screens and tunnel walls.
2. Air cleaning and odor removal: filters that are used in enclosed spaces (e.g. public toilets) or filters for air-conditioning equipment.
3. Water treatment: groundwater treatment installations, water purification installations in the intakes of drinking water from rivers.
4. Self-disinfecting materials: towels, linings, clothing, equipment in hospitals, wall surfaces of operating rooms.
5. Removal of lesions: anti-cancer therapy.
The properties of lithopone are very suitable for use in the production of coatings. Because the ingredients of lithopone are zinc sulfide and barium sulfate, and the more zinc sulfide content, the stronger its covering power. This indicates a paint product with strong white covering power. It is different from water in that it reacts with acid but does not react with alkali. It has a wide range of uses. Because its structural properties are similar to titanium dioxide and its price is relatively cheap, it can also be used as a substitute for some titanium dioxide. Lithopone can be used for coloring paints, inks, pigments, rubber, paper, leather, enamel, etc.
It adds a bright white color to coffee creamers, baked goods, chewing gums, hard-shell candies, puddings, frostings, dressings, and sauces. But the nanoparticles found in “food-grade” titanium dioxide may accumulate in the body and cause DNA damage—which is one way chemicals cause cancer and other health problems.
