In 2016, the European Food Safety Authority, or EFSA, assessed titanium dioxide and determined that the evidence available at the time didn’t conclusively point to any health problems for consumers.
CAS: 1345-05-7
Anatase titanium dioxide manufacturers cater to a wide range of applications
Below 20% substitution, it is recommended to replace 1 kg of TiO2 with 1 kg of lithopone supplier.
Still, you may wonder whether it’s safe for consumption.
Moreover, lithopone's influence on processing cannot be overlooked. It facilitates easier mixing and molding by acting as a lubricant during the compounding stage. This results in reduced energy consumption and shorter cycle times, translating into increased efficiency and lower production costs for manufacturers.Titanium dioxide is one of the many oxides formed naturally in our environment. Manufacturers source this mined mineral from rutile, brookite, and anatase. It is then processed and refined to meet stringent safety guidelines based on the end-use for the mineral.
In 2022, a year after the EFSA recommended against the use of E171, the Food Standards Australia New Zealand (FSANZ) conducted its own reassessment of titanium dioxide as a food additive. The agency concluded that titanium dioxide was indeed safe to use as a food additive. The United Kingdom and Canada came to similar conclusions.
Since then, there has been a few animal studies suggesting titanium dioxide is connected to cancer. A 2017 study in Scientific Reports, for instance, found that rats with titanium dioxide in their diet had impaired immune systems, which could contribute to autoimmune diseases and colorectal cancer.
Titanium dioxide is a widely used white pigment that is commonly found in everyday products such as paint, sunscreen, and food coloring. As the demand for titanium dioxide continues to rise, the establishment of titanium dioxide factories has become crucial in meeting this growing need. One such factory that plays a significant role in the production of titanium dioxide is the R2196 Titanium Dioxide Factory.Titanium dioxide (TiO2). Titanium dioxide is the most common white pigment used today. As a pigment, titanium dioxide is unique because it combines both high colouring and high opacifying capacity. This is mainly due to its high refractive index (2.7). Furthermore, titanium dioxide is an excellent UV absorber (it is used in sun protective creams). Some typical properties are: density 3.3-4.25 g/cm3; pH of water suspension 3.5-10.5; particle size 8–300 nm; oil absorption 10–45 g/100 g; specific surface area 7–160 m2/g. Most titanium dioxide is produced from the rutile (TiO2) or ilmenite (titanate of ferrous iron). Titanium dioxide can be obtained using different processes.
From a stability standpoint, lithopone, a fusion of zinc sulfide and artificially precipitated barite, is non-toxic and exhibits resilience to mild lyes and acids. However, it is incompatible with colors containing copper. Despite its strong covering power in oil, lithopone’s drying capabilities are notably limited, posing potential issues for artists. Notably, early experimentation with lithopone-based grounds instead of zinc white resulted in undesirable darkening, although this blackness receded upon drying. This unpredictable behavior has sparked debate among scientific communities, emphasizing the need for further exploration and understanding of this pigment.
Zinc oxide. Zinc oxide is a popular cross-linking agent for rubber and for various resins. It is essential in the formulation of solvent-borne polychloroprene adhesives. Furthermore, zinc oxide is a good UV stabilizer, has biocidal activity and has a relatively high refractive index (2.0) which makes it an efficient white pigment. Some typical properties are: density 5.6 g/cm3; particle size 0.036-3 μm; oil absorption 10–20 g/100 g; specific surface area 10–45 m2/g. Zinc oxide is produced by reaction of the metal in the vapour state with oxygen. Zinc oxide is nonporous and is quite pure. Thus, the high surface area of some grades is due to the small particle size of zinc oxide. Some grades, especially for use in the rubber industry, are surface modified by deposition of 0.2-0.4% of stearic acid, propionic acid, or light oil [47].